NetApp OnTap Simulator 8.3 – How to

Updated on 25/08/2015:
– New Simulator Version 8.3 as OVF updates

About this Post

This post should give you an easy starting point to work with the NetApp DataONTAP Simulators and to install a lab demo environment.
It shows how to setup a single node Clustered Data OnTap Simulator. If you need more f.e. for SnapMirror/SnapVault just deploy more of them in the same way.

Pre-Requirements

You need at least 1 network/subnet for the 4 used Ethernet Ports of the simulator. You can connect all 4 network cards of the appliance to the same network.

You need round about 15 free IP addresses for the management and data ports.

You need VMware Workstation or VMware ESX Server.

IMPORTANT: The main idea behind the simulator is to simulate NetApp Storage Systems.

Getting the required Software

  1. Login to support.netapp.com with your credentials
  2. Go to “Download – Software” and click on “Data ONTAP Simulator”
    1
  3. Select “Simulator 8.x”
    2
  4. Download your required OFV template for VMware Workstation or VMware ESX
    Download the licenses as well.
    3

Importing the virtual appliance to Workstation or ESX

As soon as we have downloaded the OFV template we are now ready to deploy the Simulator.

  1. Different ways to import the virtual appliance
    1. When using VMware Workstation
      1. Open Workstation and click “File-Open”
        4
      2. Browse the path to the OVF and click “Open” to import the VM in VMware Workstation.
      3. Open the VM Settings of the imported VM by clicking “Edit virtual machine settings”
        6
      4. Change all Network Adapters to the same Network. In our case we do a simple deployment and we don’t use different Networks.
    2. When using VMware ESX
      1. Login to you VMware ESX or vCenter
      2. Click on “File – Deploy OVF Template” and navigate to your downloaded OVF template.
      3. Import the template by entering a name and the required fields.
      4. At the Network Mapping map all adapter to the same network segment as it is the easiest way to work with the simulator.

First time boot of the Simulator and base configuration

Now that we have registered our system it’s time for the first boot and base configuration.

    1. During the first boot of the Simulator please wait for the promt “Press CTRL+C for special boot menu” and then press CTRL + C
      14
    2. When the special boot menu appears please choose option “4 – Clean configuration and initialize all disks” to clean the system
      15
    3. Confirm the warnings with yes.
      16
    4. Wait until the wipe is finished – will take some time – and you see the following messages on the console.
      17
    5. Type “yes” on the first question
      18
    6. Enter the following information’s for the Node:
      Enter the node management interface port [e0c]                Press Enter or type e0c
      Enter the node management interface IP address:             Enter your IP Adress
      Enter the node management interface netmask:                 Enter your Netmask
      Enter the node management interface default gateway    Enter your default Gateway
    7. After the node information’s you should be forwarded to the cluster setup. If not please login using “admin” as user and execute “cluster setup”
    8. Enter the following information’s for the Cluster setup:
      2015-08-18 12_25_42-NetApp_Sim_howto.pdf - Adobe Reader
      You have now finished the first setup tasks for the simulator.
    9. Log in to your Simulator using SSH (f.e. putty) and the cluster management IP address.
    10. Install all licenses for the simulator
      1. VMware ESX licenses
        license add -license-code CAYHXPKBFDUFZGABGAAAAAAAAAAA   
        license add -license-code APTLYPKBFDUFZGABGAAAAAAAAAAA   
        license add -license-code WSKTAQKBFDUFZGABGAAAAAAAAAAA   
        license add -license-code CGVTEQKBFDUFZGABGAAAAAAAAAAA   
        license add -license-code OUVWXPKBFDUFZGABGAAAAAAAAAAA   
        license add -license-code QFATWPKBFDUFZGABGAAAAAAAAAAA   
        license add -license-code UHGXBQKBFDUFZGABGAAAAAAAAAAA   
        license add -license-code QLXEEQKBFDUFZGABGAAAAAAAAAAA   
        license add -license-code GCEMCQKBFDUFZGABGAAAAAAAAAAA   
        license add -license-code KYMEAQKBFDUFZGABGAAAAAAAAAAA   
        license add -license-code SWBBDQKBFDUFZGABGAAAAAAAAAAA   
        license add -license-code YDPPZPKBFDUFZGABGAAAAAAAAAAA   
        license add -license-code INIIBQKBFDUFZGABGAAAAAAAAAAA 
      2. VMware Workstation license
        license add -license-code YVUCRRRRYVHXCFABGAAAAAAAAAAA   
        license add -license-code WKQGSRRRYVHXCFABGAAAAAAAAAAA   
        license add -license-code SOHOURRRYVHXCFABGAAAAAAAAAAA   
        license add -license-code YBSOYRRRYVHXCFABGAAAAAAAAAAA   
        license add -license-code KQSRRRRRYVHXCFABGAAAAAAAAAAA   
        license add -license-code MBXNQRRRYVHXCFABGAAAAAAAAAAA   
        license add -license-code QDDSVRRRYVHXCFABGAAAAAAAAAAA   
        license add -license-code MHUZXRRRYVHXCFABGAAAAAAAAAAA   
        license add -license-code CYAHWRRRYVHXCFABGAAAAAAAAAAA   
        license add -license-code GUJZTRRRYVHXCFABGAAAAAAAAAAA   
        license add -license-code OSYVWRRRYVHXCFABGAAAAAAAAAAA   
        license add -license-code UZLKTRRRYVHXCFABGAAAAAAAAAAA   
        license add -license-code EJFDVRRRYVHXCFABGAAAAAAAAAAA   
      3. Enter the following commands to complete the base installation
        To get your nodename (used as <NODE> below) type “node show”.
        2015-08-18 12_28_50-NetApp_Sim_howto.pdf - Adobe Reader
        Reboot your system with the command “reboot”.With that the base configuration is finished.

I hope the post helped you working with NetApp OnTap Simulator.
Any feedback or comment is welcome.

Advertisements

7 thoughts on “NetApp OnTap Simulator 8.3 – How to

  1. This was very helpful. I am a new NetApp user and have been looking for a platform. The NetApp website should have instructions like this when we download the simulator.

    Thanks for all of your hard work putting this together.

    Liked by 1 person

  2. I logged as guest user and try to download simulator on netapp site its saying you are not authorised , do we need to have active subscription with netapp to download the simulator ?

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s